GSE 350 Weight Indicators
(NMI approved in Australia for trade use)

COMMUNICATIONS

• Port 1 RS232 bi-directional serial port or RS485 Opt. Or 20mA Opt
• Data Output String Fourteen (14) selectable fixed-format transmissions available, 1 custom format (programmable via RS232)
• Protocol Selectable
• Baud Rate 150-9600 bps

DISPLAY

• LED 6-digit weight display, 0.8" (22mm) height
• LED 11 LED annunciators for operational status
• LCD 6-digit weight display, 1" (25mm) height
• LCD 11 LCD annunciators for operational status
• LCD Includes LCD checkweight/sort bar

ELECTRICAL

• Power Requirement Zinc die cast enclosure: 12 - 26 VAC/ 12 -36 VDC
• Power Requirement Stainless steel enclosure: 90 - 250 VAC/ 12 -36 VDC
• Excitation Voltage 10 VDC, short circuit protected
• Max. Excitation Current 180 mA, power (6) 350 ohm bridge
• Fuse 0.8A Slow - Blow (when using AC power)
• Signal Input Sensitivity 0.1 - 20 mV/V
• Signal Connection 4 or 6 lead with sense leads

ENCLOSURE

• Zinc Die Cast Black powder coat paint, self-standing on flat surface
• Stainless Steel Designed to NEMA 4X, IP65 included swivel bracket/stand
• Shipping Weight 7lb (3.2 kg) zinc die cast
• Shipping Weight 6lb (2.7 kg) Stainless Steel Enclosure
• Keypad 5 key, durable elastomeric (rubber)

PERFORMANCE

• Full Scale(F.S.) Selectable 0 to 999,999
• Resolution 20-bit A/D converter, 100,000d displayed
• Resolution 1,000,000d internal
• A/D Conversion 60 Hz
• Zero Track 0 - 100% of F.S.
• Zero Range Selectable, 0.01-100% Full Scale
• Operating Temperature -10 Degrees Centigrade to +40 Degrees Centigrade
• Units of Measure lb, kg, oz, g, lb oz
• Warranty 2 year limited
• Non-Linearity 0.005% Full Scale, Load Cell dependent
• Non-Linearity 0.005% Full Scale, Load Cell dependent

PROCESS CONTROL

• Outputs Selectable modes such as target and preact learn
• Outputs Annuciators and baragraph (LDC only) indicate status on both LED and LCD displays.
• Outputs Relay output module is optional (3 outputs)
• Remote Input 1 momentary contact closure (100ms minimum) Tare, Print, Zero, activate output

Options

• Analog Output Module
• Relay Output Module
• Battery Operation
• RS485 Module
• RS485 Module
• Fiber Optic Transceiver in Com Port 2
• Wall Mount
• Panel Mount Kit