-
PL3000 Platform Scale
PL3000 Platform Scales are a low cost, high qualtiy scale for the platform, pallet Scale Industry. Available in Painted Mild Steel and option can be to have this unit also in galvanized finish
-
PL3000U Platform Frame
The PL3000U Scale Frame is designed for weighing of items via a pallet jack that can be lowered onto the outer shoulders of the frame. This is used were the items being weighed are the same size. NO ramps required.
-
PB3000 Platform Scale
The PB3000 is an industrial platform and is designed with a floating deck to prevent side loads causing damage to the load cells. This system is for areas where multiple fork lifts are in use and collisions with the scales are expected.
-
PB3000HD Platform Scale
The PB3000HD Platform Scale is designed for EXTREME high usage environments where the system is continuously knocked or higher capacities are required.
-
PB3000 Drop Center Platform Scale
The PB3000 Drop Center is designed for the use of trolleys, pallet jacks and tubs on wheels to allow for a low ramp to be used. As the system is very low the angle for the ramps is gentle enough to easily push wheeled devices onto the scale.
-
PB3000RW Over Head Platform Scale
The PB3000 Platform Scale is designed for Extreme Wet Environments where the system is continuously around water. In the case of pitted platform scales, the pit drain can be blocked and the load cells can be damaged by being submerged.
-
Euro Bin Lift Weigh System
With this weighing system, there is no need for ramps, which are an OH&S issue for both trip hazard and physical issue. As this system is manufactured in Brisbane Australia, most of the designs can be modified to best fit the intended industry and work place.
-
AGRI Weigh Beams
Designed for Industrial Use. Built with ease of operation due to the design of the varied feet for varied applications. the Associated Scale Service built Weigh Beams have been around for more than 25 years.
-
AM2406 Weigh Beams
Designed for Industrial Use. Build with ease of operation due to the design of the varied feet for varied applications. The Associated Scale Service build Weigh Beams have been around for more than 25 years.
-
Car Wheel Pads
The Wheel and Axle Weighing System was designed using industrial shear beam load cells. With simple operation and internal rechargeable battery and printer this car and trailer weighing system upholds optimate efficiency.
-
Weighbridge Above Ground
Associated Scale Services designs and manufactures weighbridge. As the manufacturer customizing and size requirements are simply offered without additional development cost. Both concrete and steel deck versions are available.
-
Weighbridge In Ground and Pitted
Associated Scale Services designs and manufactures weighbridge. As the manufacturer customizing and size requirements are simply offered without additional development cost.
-
Axle Weighbridge (Pitted)
Associated Scales designs and manufactures custom axle weighing systems to allow for either single axle weighing or axle clusters. Sizing of the axle weighbridge is determined on the actual customers requirements.
-
AM2508LC Trailer Tow Ball Weight Tester
The Trailer Tow Ball Tester allows for an accurate weight at the tow ball of a trailer. The easy to use and is designed around industrial weighing components. It comes in both a replaceable battery version as well as an optional rechargeable battery
-
AM2507AL Tow Ball Weight Tester
Assosciated Scale Service has developed and manufactured a simple weighing system for testing the weight of the load on a tow ball.
-
RL-5426 TANK WEIGHING
The RL-5426 was designed for silo and tank weighing with exceptional accuracy. This tank weighing module is easily installed with lightning protected load cells and inbuilt up lift and side restraints.
-
ASAL TANK WEIGHING MODULE
This tank weighing module is designed and manufactures in Australia.
-
ASAM WEIGH MODULE
This tank weighing module is designed and manufactures in Australia. Designed with the ANYLOAD 563YH Shear
Beam Load Cell, the ASAM allows for a low cost solution to weigh preexisting structures like tanks, silos or just about anything with accuracy and assurance of performance quality.
-
ASCI WEIGH BLOCK AND COMPONENTS
This tank weighing module is designed and manufactures in Australia.
-
ASRM RUBBER MOUNT MODULE
Designed with the ANYLOAD 563YH Shear Beam Load Cell, the ASRM allows for a low cost solution to weigh systems where vibration may be a concerns.
-
ASSB Bulka Bag Filling Station
Bulka Bag Filling Station allows for bulk bags to be filled accurately to a desired weight.
-
ASBB04 Bulka Bag Dispensing Station
The Bulka Bag dispensing station is designed to batch directly out of a bulk bag.
-
ASVB Vibrator Filling Station
The ASVB is a low cost valve bagging station designed for products that requrie high bag rates from gravity fed silo or holding hoppers.
-
ASV Valve Bag Filling Station
The ASV is a low cost valve bagging station designed for products that require high bag rates from gravity fed silo or holding hoppers.
-
Gross Weighing Bagging System
GROSS Bagging is where the filling and weighing is performed at the same time. This is the most economical bagging system with the simplest operation.
-
Net Weighing Bagging System
NET Bagging System, the filling process is operating while the bag is being removed and readied for the next dump.
-
PL3000 hazardous area scale
PL3000 hazardous area scale are a low cost, high qualtiy scale for the platform, pallet Scale Industry. Available in Painted Mild Steel and option can be to have this unit also in galvanized finish