SCALES, CALIBRATIONS AND PROCESS CONTROL
Australian Designed and Manufactured for the Weighing Industry

Associated Manufacturing

  • Euro Bin Lift Weigh System

    Euro Bin Lift Weigh System

    Pneumatically controlled. With this weighing system, there is no need for ramps, which are an OH&S issue for both trip hazard and physical issue. As this system is manufactured in Brisbane Australia, most of the designs can be modified to best fit the intended industry and work place.

    read more
  • Car Wheel Pads

    Car Wheel Pads

    The Wheel and Axle Weighing System was designed using industrial shear beam load cells. With simple operation and internal rechargeable battery and printer this car and trailer weighing system upholds optimate efficiency.

    read more
  • AGRI Weigh Beams

    AGRI Weigh Beams

    These Heavy Duty Weigh Beams are designed for Industrial Use, they are build with ease of operation due to the design of the varied feet for varied application.

    read more
  • Trailer Tow Ball Weight Tester AM2508LC

    Trailer Tow Ball Weight Tester AM2508LC

    The Trailer Tow Ball Tester allows for an accurate weight at the tow ball of a trailer. The easy to use and move device is designed around industrial weighing components.

    read more
  • Tow Ball Tester AM2507AL

    Tow Ball Tester AM2507AL

    Manufactured from a solid billet of Aluminium the system is light and very simple to use. This device is for the use of tow ball tongue that are fitted through a 50mm square tube.

    read more
  • ASAM Weigh Module

    ASAM Weigh Module

    This tank weighing module is designed and manufactures in Australia. Designed with the ANYLOAD 563YH Shear Beam Load Cell, the ASAM allows for a low cost solution to weigh preexisting structures like tanks, silos or just about anything with accuracy and assurance of performance quality.

    read more
  • ASAL Tank Weighing Module

    ASAL Tank Weighing Module

    This tank weighing module is designed and manufactures in Australia

    read more
  • ASRM Rubber Mount Module

    ASRM Rubber Mount Module

    Designed with the ANYLOAD 563YH Shear Beam Load Cell, the ASRM allows for a low cost solution to weigh systems where vibration may be a concerns.

    read more
  • ASCI Weigh Block and Components

    ASCI Weigh Block and Components

    This tank weighing module is designed and manufactures in Australia

    read more
  • Associated Scale Service FPT-5000 Pressure Transducer

    Associated Scale Service FPT-5000 Pressure Transducer

    This tank weighing module is designed and manufactures in Australia

    read more
  • Axle Weighbridge (Pitted)

    Axle Weighbridge (Pitted)

    Associated Scales designs and manufactures custom axle weighing systems to allow for either single axle weighing or axle clusters

    read more
  • Axle Weigh Pad 2t

    Axle Weigh Pad 2t

    Ultra thin weigh pad design. 18mm High.Can be used to measure axle weight and whole vehicle weight when two or four weigh-pads are connected together

    read more
  • Axle Weigh Pad 10t/30t

    Axle Weigh Pad 10t/30t

    Ultra thin weigh pad design. As low as 19mm High for the 10t pad

    read more
  • Weighbridge Above Ground

    Weighbridge Above Ground

    Associated Scale Services designs and manufactures weighbridge. As the manufacturer customizing and size requirements are simply offered without additional development cost

    read more
  • Weigh Bridge – In Ground and Pitted

    Weigh Bridge – In Ground and Pitted

    Associated Scale Services designs and manufactures weighbridge. As the manufacturer customizing and size requirements are simply offered without additional development cost

    read more
  • ASBB Bulka Bag Filling Station

    ASBB Bulka Bag Filling Station

    Bulka Bag Filling Station allows for bulk bags to be filled accurately to a desired weight. The system shown in the photo has a vacum product transfer system but the system will attach to any silo, holding vessel or transfer system

    read more
  • ASBB04 Bulka Bag Dispensing Station

    ASBB04 Bulka Bag Dispensing Station

    The Bulka Bag dispensing station is designed to batch directly out of a bulk bag. The outlet can be design to either fill containers (as shown in picture) or attached to a bagging system to package smaller bags

    read more
  • ASOB Bag Filling Station – Open Mouth Bags

    ASOB Bag Filling Station – Open Mouth Bags

    The ASOB bagging system is designed primarily for filling open mouth type bags.

    read more
  • ASVL Valve Bag Filling Station

    ASVL Valve Bag Filling Station

    The ASVL is a low cost valve bagging station designed for products that requrie high bag rates from gravity fed silo or holding hoppers. This system allows for valve bags to be filled at rates of 20 seconds with moderate accuracy. (Fill rates are subject to product flow)

    read more
  • ASVB Valve Bag Filling Station

    ASVB Valve Bag Filling Station

    The ASVB is a low cost valve bagging station designed for products that requrie high bag rates from gravity fed silo or holding hoppers.

    read more
  • Fork Lift Scale

    Fork Lift Scale

    Associated Scale Services designs weighing systems for fork lift scales. These system are quoted for the customer needs to ensure the correct devices is supplied for the correct application. Please contact the sales representative for further information on (07)3272 0077.

    read more
  • Masses (Standard)

    Masses (Standard)

    Test or Standard Mass (Test Weights) can be purchased as standard masses or if needed customized values and sizes.

    read more
  • Masses (Customized)

    Masses (Customized)

    Custom Masses can vary in size, material used or in specific mass (weight) The manufacturing department can manufacture masses from 10g to 3t

    read more
  • Custom Platforms

    Custom Platforms

    Associated Scale Service Pty Ltd design and manufacture platform scale to suite customer applications.

    read more
  • Customized Bench Scales

    Customized Bench Scales

    Customizing is a common need for customers who need equipment that out of the box type scales can not meet the requirements accurately.

    read more
  • Scale Feet

    Scale Feet

    Standard and Customized feet are manufactured to suite most types of scales. If there is a style that is not available please ask the department to give a quote for a customized foot

    read more
  • Masses

    Masses

    Associated Scale Services manufactures as well as re distributes a full range of masses. These can be customized if required to a specific requirement if necessary

    read more
  • Load Cell Juction Boxes

    Load Cell Juction Boxes

    Associated Scales Services uses signal trimming junction boxes

    read more
  • 205l Drum Weighing (For Pallet Racking)

    205l Drum Weighing (For Pallet Racking)

    The drum weighing system was designed for dispensing product from the vessel while on pallet racking. A simple process that allows the drum weight to be tared back to zero and the quantity of product to be shown once dispensed

    read more
  • PL3000U Platform Frame

    PL3000U Platform Frame

    The PL3000U Scale Frame is designed for weighing of items via a pallet jack that can be lowered onto the outer shoulders of the frame.

    read more
  • AM2406 Weigh Beams

    AM2406 Weigh Beams

    The AM2406 Weigh Beams are designed for user flexibility at an economical price.

    read more
  • FO Series Overhead Rail Scale

    FO Series Overhead Rail Scale

    FO Series is a stainless steel over head rail system. Designed, developed and manufactured in Australia

    read more
  • TR600 Over Head Track Scale

    TR600 Over Head Track Scale

    Associated Scale Services TR600 Over Head Track is designed as a floating system for higher levels of accuracy and protection to load cells.

    read more
  • PB3000RW Over Head Platform Scales

    PB3000RW Over Head Platform Scales

    The PB3000 Platform Scale is designed for Extreme Wet Environments where the system is continuously around water.

    read more
  • PB3000 Drop Center Platform Scale

    PB3000 Drop Center Platform Scale

    The PB3000 Drop Center is designed for the use of trolleys, pallet jacks and tubs on wheels to allow for a low ramp to be used

    read more
  • PB3000HD Platform Scales

    PB3000HD Platform Scales

    The PB3000HD Platform Scale is designed for EXTREME high usage environments

    read more
  • PB3000 Platform Scales

    PB3000 Platform Scales

    The PB3000 is an industrial platform and is designed with a floating deck to prevent side loads causing damage to the load cells.

    read more
  • PL3000 Platform Scales

    PL3000 Platform Scales

    Associated Scale Service now introduce a low cost, high qualtiy scale for the platform, pallet Scale Industry.

    read more